| Weighted Base Mount - PV308 |
Check Price
|
Shipping
Wt.
|
- The husky, cast iron 308 Base Mount weighs 5lbs. (2.3kg), making it compact and stable.
- Included are four non-marring, anti-skid neoprene base pads.
- Two 1/4 - 20 holes are drilled and tapped on the side extension for conveniently mounting accessories such as the model 371 Solder Station.
- Three screws and nuts are included for mounting a base to the Weighted Base Mount.
|
|
6 lbs
|
|
| Surface Plate Base Mount - PV310 |
Check Price
|
Shipping
Wt.
|
- The 310 Surface Plate Base MOunt is a precision cast iron flat surface (Blanchard ground) ideal for layout work and as a portable work station.
- 10" x 10" (256mm x 256mm) square and weighing 10lbs. (4.5kg).
- Included are four non-marring, anti-skid neoprene base pads.
- The top surface is drilled and tapped in one corner for the 300 Standard Base or 305 Low-Profile Base, mounting screws are included.
|
|
11 lbs
|
|
| Bench Clamp Base Mount - PV311 |
Check Price
|
Shipping
Wt.
|
- The 311 Bench Clamp Base Mount clamps to the edge of any work bench or table up to 3 7/16" (88mm) thick.
- For use with the 300 Standard Base and the 305 Low-Profile Base.
- Four neoprene pads are included and may be used when additional anti-slip characteristics are desired without excessive tightening of the clamping screw.
- Three screws and nuts are included for mounting a base to the Bench Clamp.
|
|
2 lbs
|
.
|
| Part Tray Base Mount - PV312 |
Check Price
|
Shipping
Wt.
|
- The cast aluminum 312 Parts Tray Base Mount attaches to either the 300 Standard Base or the 305 Low-Profile Base.
- Six individual trays are cast into it, much like a "lazy susan",
to neatly hold small parts and tools.
- The Mount is 8 1/2" (218mm) in diameter.
- Included are six non-marring, anti-skid neoprene base pads.
- Three 1/4 - 20 holes are drilled and tapped on the outer lip for mounting accessories.
|
|
2 lbs
|
|
