-
|
PV Jr. Head - PV203 |
Check Price
|
Shipping
Wt.
|
 |
- Perfect for at-home hobbyists and electronics enthusiasts.
- Fits all 300 series bases.
- Grooved jaws open to 2 7/8" (74mm). Jaws are 1" wide(26mm) and 2" tall (51mm).
- The stem is 1" (26mm) long and 5/8" (16mm) in diameter.
- Overall height is 3 3/4" (96mm).
|
|
2 lbs
|
|
|
-
|
Standard Head - PV303 |
Check Price
|
Shipping
Wt.
|
 |
- Fits all 300 series bases
- Jaws open to 2 1/4" (58mm). Jaws are 2 1/2" wide (64mm).
- The stem is 2 1/8" (54mm) long and 5/8" (16mm) in diameter.
-
Nylon jaws have a satin finish to improve grip. Steel, brass, Teflon® and grooved nylon jaws are available as accessories for this head.
- As a general purpose head, you can't go wrong with its exceptional strength and quality
|
|
2 lbs
|
.
|
|
-
|
Low-Profile Head - PV304 |
Check Price
|
Shipping
Wt.
|
 |
- The Low-Profile Head has the same basic mechanical features as the 303 Standard Head, except that the stem is cast into the base of the head to allow close positioning to the work surface.
- When used with the low profile base (Model 305) the head can be swung out and away from the bench surface.
- Fits all 300 series bases
- Jaws open to 2 1/4" (58mm). Jaws are 2 1/2" wide (64mm).
- The stem is 1 5/8" (42mm) long and 5/8" (16mm) in diameter.
- Steel jaws may be interchanged with any of the accessory jaws.
- Overal length is 7 3/4" (199mm).
|
|
2 lbs
|
.
|
|
|
|
-
|
Fixturing Head - PV337 |
Check Price
|
Shipping
Wt.
|
 |
- The 337 Fixturing Head allows permanent fixturing for production line assembly or reptitive repair. Work can be bolted to this head easily because of its six slots and bolt holes
- Fits all 300 series bases
- The flat round surface is 5 3/8" (138mm) in diameter.
- The steel stem is die cast into the alluminum head and is 2" (51mm) long and 5/8" (16mm) in diameter.
- Overal Height (stem to top of head) is 3 3/4" (96mm).
|
|
2 lbs
|
.
|
|
-
|
Wide Opening Head - PV366 |
Check Price
|
Shipping
Wt.
|
 |
- This head is a versatile, general purpose electronics head created especially for production lines, technicians, and designers.
- Jaws open to 6" (164mm) to accommodate most PC boards in its molded, deep-ribbed neoprene jaw pads. When pads are reversed, the wide "V" can be used for securing delicate items, such as tuners, coils, motor armatures, ect.
- The jaw's control knob is micro-adjustable so it exerts the exact amount of pressure you need.
- Fits all 300 series bases
- The stem is 2 1/4" (58mm) long and 5/8" (16mm) in diameter.
- Overall height is 5 1/8" (131mm).
|
|
2 lbs
|
.
|
|
-
|
Extra Wide Opening Head - PV376 |
Check Price
|
Shipping
Wt.
|
 |
- The double action jaws on the 376 Self-Centering Extra Wide Opening Head allow fast opening and closing.
- The self-centering feature lets you hold heavier objects because the weight is centered over the base.
- Jaws open to 9" (231mm).
- The jaw plates can be reversed to close together, and the reversable jaw pads feature ribbing on one side and a deep "V" groove on the other.
- Fits all 300 series bases
- The stem is 2 1/4" (58mm) long and 5/8" (16mm) in diameter.
- Overall height is 5 1/4" (135mm).
|
|
2 lbs
|
.
|
|
