|
Bogen Communications Power Amplifiers
|
| These high-performance power amplifiers can safely drive loads continuously at full (RMS) power, in ambient temperatures of up to 120° F. Overload protection includes an electronic shutdown circuit and a thermal breaker. |
P r o d u c t F e a t u r e s :
• 125 and 250 watt models
• Designed for continuous operation at rated power, up to 120° F
• Convection-cooled
• Power MOSFET output circuitry
• Thermal protection and automatic electronic overload protection
• Hi-Z unbalanced and Lo-Z balanced or unbalanced input w/ accessory transformer (TL600)
• Internal lo-cut filter switch
• 90 dB signal-to-noise
• Input sensitivity: Hi-Z, 500 mV; Lo-Z, 100 mV (HTA125A), 150 mV (HTA250A)
• Power Consumption: 260W (HTA125A); 520W (HTA250A)
• 4- and 8-ohm, 25V and 70V outputs
• Line bridging (driving multiple amplifiers) is possible w/ an accessory transformer (TL100)
• 19" rack-mount design (3 rack spaces) |
 |
| Part Number |
Inputs
|
Wattage
|
Dimensions
|
Shipping Wt
|
Check Price
|
HTA125A |
2
|
125
|
19"x5-1/4"x11"
|
44 lbs
|
|
| HTA250A |
2
|
250
|
19"x5-1/4"x11"
|
56 lbs
|
|
|
| The BPA60 supplies 60 watts of power amplification for professional and commercial sound systems requiring continuous hig
h-quality sound. |
| P r o d u c t F e a t u r e s :
• 60 watts
• 1 input: Hi-Z unbalanced
• Lo-Z balanced input w/ accessory transformer
• Input level control and lo-cut filter switch
• 8-ohm/25V, 16-ohm, 25VCT, and 70V outputs
• Sensitivity: 300mV, Hi-Z; 75mV, Lo-Z
• Resettable circuit breaker and thermal protection
• Operates with 25V and 70V systems
• 120V AC, 60 Hz, 180W @ full rated output
• Rack-mountable with accessory mounting kit: RPK53 (2 rack spaces)
• UL and CSA listed
|
 |
| Part# |
Wattage |
Weight |
Dimensions |
Check Price
|
| BPA60 |
60 |
19lbs |
15-1/4"W x 3-1/2"H x 8"D |
|
|
| The MT250D is a highly versatile, high-power performer, deli vering 250 watts of power with battery backup capability. |
 |
P r o d u c t F e a t u r e s :
• 250 watts (RMS) continuous
• 1 input: Hi-Z unbalanced
• Lo-Z balanced input w/ accessory transformer
• 8-ohm, 25V, 25VCT, 70V, and 100V outputs
• Operates from 120V/240V AC or 24V back-up battery (not included)
• Battery-saver circuit reduces idle current
• Sensitivity: 1 volt @ full rated power, Hi-Z; 70-200mV, Lo-Z
• Protection against line surges, overloads, and abnormal heat build-up
• AC power consumption: 650 watts, full power; 30 watts, standby
• LED overload shutdown and illuminated power indicators
• Lo-cut filter switch & input level control
• Rack-mountable (3 rack spaces)
• UL listed |
| Part# |
Wattage |
Weight |
Dimensions |
Check Price
|
| MT250D |
250 |
60lbs |
19”W x 12-1/2”D x 5-1/2”H |
|
|
| Bogen's Black Max amplifiers are designed to provide maximum performance in constant voltage speaker systems. Dual 70V transformerless outputs deliver exceptionally clean audio to speaker systems requiring u
p to 1200 watts of total power, or separate zones of audio of up to 600W per zone, in a single package. High efficiency class H amplifi er design and auto-sleep feature reduce power consumption on continuously-powered systems. Rear-mounted volume controls, independent low-cut filters on each input, and pluggable input terminal strips were specifically designed for the fixed install market. Built-in power sequencing for multiple Black Max amplifiers combats current in-rush problems of large audio systems. Massive power toroid and heat sinks; heavy 14-gauge chassis; Back-Slope™ AC voltage stabilization; clip limiters; and DC voltage, over-current, and thermal protection circuits make this a workhorse amplifier. |
• Dual 70V amplifier channels
• 3 power levels: 600W, 450W, or 300W per channel for 70V speaker systems
• Low noise, low distortion, and high slew rate
• High efficiency class H amplifier design
• Transformerless direct drive outputs
• Electronically balanced high-impedance inputs
• Pluggable terminal strips for input connections
• Independent low-cut filters on each input
• Built-in power sequencing of other Black Max amplifiers
• Pluggable terminal strip for sequencing wiring
• Rear-mounted power sequencing status indicator
• DC, overload, short circuit, and thermal protection circuits
• Clip limiting circuits for speaker protection
• Power-saving sleep mode for intermittent use applications
• Status, Signal, and Limit indicators
• Back-Slope AC voltage stabilization for dependable performance over varying AC line voltages
• Heavy-gauge steel chassis with cast aluminum front panel
• Rear-mounted volume controls
• Mounts in 2 rack spaces (3-1/2") directly stackable without need for extra space above or below
• 2 independent, continuously variable, cooling fans for dependable and quiet operation
• Easily removable front fan grilles with filters |
 |
| Part# |
Wattage |
Weight |
Dimensions |
Check Price
|
| X300 |
300 |
41 |
17" x 3.5" x 16" (without rack mount brackets attached) |
|
| X450 |
450 |
44 |
17" x 3.5" x 16" (without rack mount brackets attached) |
|
| X600 |
600 |
46 |
17" x 3.5" x 16" (without rack mount brackets attached) |
|
|
|
Accessories
|
|
|
Part# |
Description |
Check Price
|
| RPK53 |
Rack Panel Kit for BPA60 3 1/2" High |
|
|
|
RPK86 |
Rack Mounting Kit for M-Class & Black Max Series |
|
|
|
TL100 |
1:1 Ratio Plug-In w/ Matching Transformer |
|
|
|
TL600 |
Plug-In 600 ohms w/ Impedance-Matching Transformer |
|
|
|
WMT1A |
Matching Transformer for HTA Series |
|
|
