Level 1 Certification Tests
- Length measurement of each cable pair.
- Locates open, shorts and distance to the fault.
- Locates split pairs and the distance to the split.
- Wire map. Graphs cables internal pairing.
- NEXT (near end crosstalk) and NEXT (FAR).
- Propation delay (time to transit cable)
- Skew (time delay between pairs).
- Speed Projection (Level 1): Algorithm converts test results into an easy-to-read graph projecting the cable's speed capability (up to 1 GIGABIT).
|
Level 2 Certification Tests
- Attenuation. Graphs level of real live data.
- Hot Splits. Splits pairs and remote split pairs detected on a dead or live cable connected to a hub, switch or PC.
- Speed Certification (Level 2). Enhanced speed display samples real live data on all active pairs up to the limit of the hub, switch or PC (up to 1 GIG)
- Note: the Level 2 test uses real data from your hub, switch or PC.
- Toner/Probe. Includes a full featured toner/probe. Energizes all 4 pairs individually to locate wires in crowded wiring closets. Non-conductive tip and volume control.
|
