Sacramento Electronic Supply
Edge Group
Home Page
Enter Our Web Store
Search Our Site
About Us
Contact Us
New Location: 11280 Sanders Drive Suite B, Rancho Cordova, CA 95742
(916) 638-4821 (800) 367-8800 Fax (916) 441-6013
NCC

Digital Temperature Indicators
TM100 TM100 Series
This series of temperature indicators can be used to monitor environments and equipment that keep products below a set temperature point. The high temperature alarm alerts personnel to a high temperature condition, protecting temperature sensitive equipment and operations. When the temperature rises to the setpoint temperature, the display flashes and an audible alarm sounds. On units with a relay output, the contacts will close. When the temperature falls below the setpoint temperature, the alarm condition ceases. To cancel the audible alarm, depressing the front panel pushbutton will interrupt the audible output for approximately 2.5 hours, and for units with a relay output, the contacts will open, but the display will continue to flash. The heavy-duty stainless steel front plate protects the unit from mechanical shock and abuse, and is designed to blend visually with other stainless steel equipment. The thermometer can be mounted directly on the equipment it is monitoring, or on a remote panel up to 250 feet away.

Setting the High Temperature Alarm: On the side of the TM100 there is a high temperature adjustment and a pushbutton switch. Depressing the switch will cause the setpoint temperature to be displayed. The setpoint can be adjusted to any temperature within the specified range of -10°F to 220°F.
Features
  • UL Recognized Component File #E104595
  • CSA Certified File LR687796
  • Compact Design
  • Easy-to-Read Red LED Digital Display
  • Temperature Reading Range of -40°F to 240°F ± 5°F or Celsius Equivalent
  • Simple Wire Hook-up
  • All Metal Case
  • Heavy Duty Stainless Steel Front Panel
  • Adjustable High Temperature Audible Alarm
Specifications
Input
Operating Voltage: 12 to 16 volts AC or DC at 250 mA
Frequency: 50/60 Hz
Accuracy: ± 2°F, ± 1 digit at ± 40°F around calibration point, ± 5°F, ± 1 digit (full range)
Resolution: ± 1°F
Temperature Sensing Range:
  -40°F to 240°F
  -40°C to 115°C (option)

Alarm Temperature Setpoint Range: -10°F to 220°F or Celsius equivalent
Operating Temperature Range: -0°F to 140°F
Alert Sound Level: 80-90 dba at 4 in.: 2.5-3.5 kHz
Output Rating: Form A contact, 1 Amp. at 250VAC
Terminations:
Probe - 22awg -12 inches long. Black and red wires
Input Power - two orange wires.
Form A output - 1/4" male spade, surface mount versions only
Note: Due to non-interchangeability of probes, the temperature indicator must be field calibrated using crushed ice and water and set to 32° or 0°

Pricing Shown is for Single Piece Sales - Call for Quanity Pricing or Values not Shown

Voltage
Part Number
Temp Range
Cost
12 to 16 VAC/DC
TNC-TM100-A10
-40 deg F to 240 deg F
$100.75

Sacramento Electronic Supply (916) 441-4821 - (800) 863-1711 - Fax (916) 441-6013