![]() |
![]() |
|||||||||||
|
||||||||||||
|
![]() |
Delay on Make (Series Load) Q1T Series |
| Upon application of input voltage, the
time delay starts. At the end of the time delay, the load is energized.
Reset is accomplished by removing input voltage. Note: The load may be located on either side of the line |
|
|
|
| Time Delay Adjustment: On-board trimpot Range: 50 mS to 10 hours in 9 ranges Repeatability: ±..5% + 8 mS maximum (0.25% typ) at constant temperature Accuracy: Maximum time -0%, +10% Minimum time -30%, +0% Input Operating Voltage: 12, 24, 120, 240 VAC/DC ±10% (On DC models, unfiltered supply voltage must be full-wave rectified) Frequency: 50/60 Hz Output Type: Solid-state, normally open series load Rating: Maximum Current -1 amp. AC/DC (resistive or inductive); Life: 100,000,000 operations |
Protection Transient Voltage: Metal oxide varistor, (see ratings below) Dielectric Breakdown: 3000 VAC, RMS, terminals to mounting Isolation Resistance: 100 megohms minimum between terminals and case Mechanical Termination: .25" x.032" male fast-on terminals Mounting: Surface mount with one #8 screw Environmental Storage Temperature: -40°C to 85°C Operating Temperature: -40°C to 65°C Humidity: 95% relative |
Pricing Shown is for Single Piece Sales - Call for Quanity Pricing or Values not Shown
| Voltage |
Part Number
|
Time Range
|
Cost
|
| 120 VAC/DC |
Q1T-00010-311
|
.5 to 10 sec
|
$54.50
|
| 120 VAC/DC |
Q1T-00600-311
|
30 to 600 sec
|
$54.50
|
![]() |
Sacramento Electronic Supply (916) 441-4821 - (800) 863-1711 - Fax (916) 441-6013
|
![]() |